How Do I Get My Brother Laser Printer to Print Again When It Says I Need Toner
Toner Yields
- Starter toner cartridge (provided with new machines) has a yield of approximately 1,000 pages (letter)
- TN210BK standard toner cartridge has a yield of approximately 2,200 pages (letter)
- TN210C, TN210M, TN210Y standard toner cartridge has a yield of approximately 1,400 pages (letter)
The approximate toner yield is in accord with the testing protocol called ISO/IEC 19798 (Letter). The testing protocol involves, amidst other things, continuous printing of a 5% coverage sample folio of text. Users who typically print one or 2-page jobs or who typically print documents with toner coverage higher than 5% should expect to receive a lower page yield.
Bodily page count will vary depending on your document blazon (standard letter, detailed graphics) and the number of pages printed per job.
The Replace Toner bulletin:
The bulletin Replace Toner appears on the display if any one of the following occurs:
- The toner cartridge is at its terminate of life and needs to be replaced.
- The developer roller has reached its upper limit of rotations.
The bulletin Replace Toner will non clear from the display if:
- The replacement toner cartridge is non installed properly.
- A starter toner cartridge is installed as a replacement toner cartridge.
- A toner cartridge from some other machine or a used toner cartridge is installed as a replacement toner cartridge.
If the message Supplant Toner continues to announced on the display after installing a replacement toner cartridge, answer the following questions:
A. Was the cartridge replaced and immediately after replacing the cartridge, Supersede Toner continued to appear? This ways the Supervene upon Toner bulletin NEVER cleared and NO pages were impress after the new cartridge was installed because the 'Replace Toner' message remained on the brandish.
B. Was the cartridge replaced and cleared Replace Toner, but the message returned after some usage of the new toner? This means a new cartridge was installed and the Replace Toner message cleared. Then, after printing some pages, Replace Toner re-appeared on the display.
If the answer is A, go to STEP 1 .
If the answer is B, refer to the solution I recently installed the starter or a new toner cartridge and I don't think I got the full yield from the toner. What tin can I do?
1. Confirm the color toner currently displayed on the LCD is the same colour as the toner cartridge that was replaced. Be sure to read the scrolling message that appears afterwards Supercede Toner. The scrolling message specifies which color needs to be replaced.
- If Yes, the color toner on the LCD is the aforementioned color toner that was simply replaced, go to STEP ii .
- If NO, the color toner currently on the display is NOT the same as the colour toner that was replaced, a replacement toner for the colour currently on the display must exist installed to clear the bulletin. It appears that later on the replacement toner cartridge was installed, a new message appeared for a unlike color. After installing a new, out-of-the box Blood brother standard toner as a replacement, your issue should be resolved.
2. Was a NEW, out-of-the box, Brother STANDARD toner cartridge (TN210) installed every bit a replacement toner?
a. The toner cartridges provided in the box with a new auto are Not new STANDARD toners. These are considered starter toners and the but time they are to exist installed and used is when the motorcar is starting time gear up upward.
b. A toner cartridge from another car or that was previously used is Non a NEW Standard toner.
c. A toner that is refilled, remanufactured or that is a non-Brother toner is NOT a new Blood brother Standard toner.
A make new, out-of-the box standard Brother toner (TN210) should be installed to clear the Replace Toner message. Do NOT install a Starter toner or a previously installed or used toner cartridge every bit a replacement toner. Our standard toner cartridges are manufactured with a reset lever that moves when installed into the machine and triggers a notification that a new cartridge has been inserted. This mechanically triggers the machine to reset the Replace Toner message.
i. The Blood brother starter toner cartridges are not manufactured with the reset lever and will not clear the message.
ii. A used or already installed toner cartridge does Non have the reset lever in the right position to trigger the motorcar to reset. The toner reset lever was already shifted when initially installed into a auto and will not take the lever in the proper position if installed over again. This ways the machine will not clear the Replace Toner message.
three. Considering a remanufactured, refilled or non-Brother toner is not manufactured by Blood brother, we cannot guarantee the operation of the toner or its ability to operate properly with our motorcar.
- If a brand new, out-of-the box Blood brother Standard toner cartridge was installed, go to Footstep 3 .
- If a Starter toner cartridge, a used Blood brother toner or a non-Brother toner was installed, you should remove it and install a new, out-of-the box, Blood brother replacement toner cartridge, your consequence should exist resolved.
Brother strongly recommends that customers use only genuine Brother drum units and toner cartridges. Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our private toner formulations. Each individual component is designed to work with the others to ensure quality and reliability. Using non-Blood brother supplies may affect the hardware performance, print quality and machine reliability. The Brother limited warranty does not apply to whatever problem that is caused past the apply of tertiary-party drum units, toner cartridges or toner.
3. Exercise the following:
a. Fully open up the peak cover past lifting upward on the handle (1).
b. Have out the colour drum unit and toner cartridge assembly that appears in the message.
NOTE: Place the drum and toner cartridge assembly on a clean, flat surface with a slice of disposable paper underneath in case the toner accidentally spills or scatters.
c. Push downward the green-labeled lock lever (1) and take the toner cartridge out of the drum unit.
Annotation: Handle the toner cartridge carefully. If toner scatters on easily or clothing, immediately wipe it off or wash information technology with cold water.
d. Gently rock the toner cartridge from side to side five or half dozen times to evenly distribute the toner inside the cartridge. Redistributing the toner may articulate the message when the drum and toner assembly is reinstalled into the auto.
e. Reinstall the toner cartridge in the drum unit of measurement until you hear it lock into identify.
f. Slide the drum unit and toner cartridge assembly into the machine. Make sure you friction match the toner cartridge color to the aforementioned color label on the motorcar.
g. Close the top comprehend.
If the problem continues and your car is within warranty, yous can locate a Blood brother Authorized Service Center (ASC) in your expanse past clicking on the link beneath:
http://www.brother-usa.com/service/default.aspx or contact Brother Customer Service by calling 1-877-Brother (ane-877-276-8437) Monday through Fri, excluding holidays.
If your machine is out of warranty, y'all tin locate a Blood brother Authorized Service Eye using the information listed to a higher place.
Source: https://help.brother-usa.com/app/answers/detail/a_id/70230/~/why-does-replace-toner-continue-to-appear-on-the-lcd-after-i-replaced-the
0 Response to "How Do I Get My Brother Laser Printer to Print Again When It Says I Need Toner"
Postar um comentário